NEPA SCCA AutoX Event #1 4/22/07

Create Account / Sign In

Sunday December 03, 2023

Quick Find

Event Categories

Autocross (5)

Hillclimb/Time Trial (3)

Off-Road (2)

RallyCross (3)

Test and Tunes (4)

Club/Organization

Or perform an
Advanced Search

Site Information

Bookmark and Share

Printer-friendly version

NEPA SCCA AutoX Event #1 4/22/07

Hosting Organization(s)

NEPA Region SCCA

Event Type

Autocross

Event Date(s)

22-Apr-2007

Event Description/
Schedule

Costs for regular Solo events this year will be $25 for SCCA members and $35 for non-members.

Regular Season:
7:00am to 8:30am: Course Setup(if you want to assist in course creation)
8:30am to 9:30am: Registration, Tech Inspection, and Course Walks
9:45am: The REQUIRED Driver's Meeting (all drivers must attend)
10:00am: The first car is off the line!

-There will be a 30-minute break between AM and PM sessions to allow for course walks and lunch.
-Course walks will only occur prior to 10am and during the afternoon lunch break.
-Online registration will get first choice of car numbers unless another competitor has already paid $5 to lock their number in for the year. Check with the registration desk at the event.
-If you are unsure about your class, please email the registrar and they will assist you. Or go to www.scca.org and download a copy of the Solo rules to make your own determination.
-Everyone who runs will be required to work 1 heat. Please see the Chief of Workers directly after the driver's meeting for your work assignment. Failure to work will result in your times not being posted and possibly a 1 event suspension.
-We will be running a "NOVICE" class for this event. If you have run less than 5 autocrosses total in the last 5 years, you are elidgeable to run in one of the 2 novice classes.
NS- Novice Stock - Vehicle is essentially unmodified from the factory with the exception of tires and non-performance parts (wings, paint, etc..).
NM- Novice Modified - Vehicle has been altered from the factory to increase performance. (intake, exhaust, turbo, motor, suspension, etc..)

**Online/Advanced Registration is NOT Required to participate in the event** You will always be permitted to register at the event.

**When selecting your "Work Assignment Preference", choose any of the following: (Registration, Tech, Timing, Announcer, Corner Worker, Start, Finish, Grid, or any)

Be sure to check www.nepascca.org for any possible event changes o

Event Location

Brodart Company

Street Address

500 Arch Street

City

Williamsport

State or Province

Postal/Zip Code

17701

Country

USA

Location Description
Driving Directions

From Route 118....When you get to the traffic light in Hughesville, turn Right. 1/4 mile up the road you will see signs for Route 220. Turn left there. (This is Old 220) At the next traffic light, turn right onto the 220S/180W ramp. Take Exit29 onto Route15N (You might be tempted to take Exit28 due to signs for 15N. Don't do it. You want Exit29.) Take the 1st exit off of 15N (Third Street). At the bottom of the ramp, turn left. Go under the overpass and immediately turn left into Brodart's parking lot.

From Scranton/Wilkes-Barre using Interstate 81. Take I-81S. Take the I-80W exit. Take the Route 180 exit to Williamsport (It is marked for Williamsport. Make sure to take the ramp that says Williamsport and NOT Milton). Take Exit29 onto Route15N (You might be tempted to take Exit28 due to signs for 15N. Don't do it. You want Exit29.) Take the 1st exit off of 15N (Third Street). At the bottom of the ramp, turn left. Go under the overpass and immediately turn left into Brodart's parking lot.

Maximum Entries

120

Online Registration Closes

20-Apr-2007 12:00 AM EST Online Registration is CLOSED

Online Registration

View Entry List

Officials and
Contacts